NanoScan OP400 Piezo Objective Positioner/Scanner With 400μm Range
The NanoScan OP400 piezo-driven objective positioner is compatible with most commercial and customized microscopes. The stage features an M32 objective thread as standard with a wide range of adapters available.
Settings for inverted or upright operation and load capacity are set during manufacture and can be further tuned in the field to optimize for specific applications.
The OP400 provides the fastest step and settle time of any piezo-driven objective positioner with a range of up to 400 µm. It features capacitive feedback sensors that ensure exceptional repeatability and resolution, comparable with devices with shorter ranges.
0-500 g load as standard: a high load version (up to 1000 g) is available.
Download datasheet
NanoScan OP400 Piezo Objective Positioner/Scanner With 400μm Range
The NanoScan OP400 piezo-driven objective positioner is compatible with most commercial and customized microscopes. The stage features an M32 objective thread as standard with a wide range of adapters available.
Settings for inverted or upright operation and load capacity are set during manufacture and can be further tuned in the field to optimize for specific applications.
The OP400 provides the fastest step and settle time of any piezo-driven objective positioner with a range of up to 400 µm. It features capacitive feedback sensors that ensure exceptional repeatability and resolution, comparable with devices with shorter ranges.
0-500 g load as standard: a high load version (up to 1000 g) is available.
Download datasheet
Key features of the NanoScan OP400
- 400μm closed loop travel range (450μm open loop range)
- Capacitive positioning sensors give sub nanometer positioning resolution and repeatability
- Made from stainless steel providing greater mechanical stiffness (faster) and temperature stability (lowest drift).
- The stage is a flexure guided system. The friction free flexures are designed to provide high stiffness and to minimize off axis motions giving high repeatability and faster cycle times.
- Options for upright and inverted microscopy applications.
- Connectors with built in stage calibration provide plug and play electronics which can be interchanged, minimizing system down times.
- Rapid settling times even with large objective loads. Tested to function for greater than 10 million full range cycles.
Applications
• Optical sectioning producing 3D images
• Autofocus systems for time lapse imaging
• High content screening
• Surface analysis
• Wafer inspection
• Scanning interferometry
| Model | OP400 |
| Axis | Z |
| Range | 400 μm |
| Position noise | 0.7 nm |
| Repeatability | 1.6 nm |
| Linearity | 0.005% |
| Step Settle | 7ms |
| Material | Aluminum/ Stainless Steel |
| Thread | RMS, M25, W26, M27, M32 |
NanoScan_OP400_EN_Datasheet
DOWNLOAD
OP400 INSTALLATION DRAWING
DOWNLOAD
