Precision, Accuracy and Speed for the best in Nano-positioning
A standalone single axis closed loop piezo actuator controller designed to cover a wide range of challenging applications needing the best dynamic performance. There is no compromise; the NPC-D-5200 delivers precision, accuracy and speed.
NPC-D-6000 series combine piezo drive amplifiers, capacitance position sensing circuitry and servo control capability
The NanoScan NPC-D-6000 Series are multi-channel nano positioning controllers designed specifically to control Queensgate Stage Mechanisms and Actuators with picometre positioning resolutions. Using state of the art digital signal processing technology the NPC-D-6000 series combine piezo drive amplifiers, capacitance position sensing circuitry and servo control capability.
Low Profile Fast 15 Micron Stage
The NPS-X-15A/NPS-X-15B Low Profile Fast 15 Micron Stage were originally designed for high speed, ultra precision MR head and disk drive testing.
Its small size and millisecond response time make it ideal for applications where high reliability and throughput are essential. A low moving mass and high stiffness combine to offer extremely high bandwidth.
Piezo scanned flexure guided stage
The NPS-XY-100A Two Axis 100µm x 100µm Stage Super Invar – is made of Super Invar construction (CTE 0.3ppm K-1) which minimizes thermal drift, on a nanometer scale this is very important. With 3 point kinematic mounts.
The NPS-XY-100D Two Axis 100µm x 100µm Stage Super Aluminum – is made of Aluminum. It has the best resolution, fastest dynamics of the XY-100 range and is the most cost-effective. It includes 4 corner mounting for simple installation.
Highly linear device with outstanding resolution
The NPS-Z-500B-UHV delivers over 100um full range at 80K at 10-9 torr. The stage is designed to operate in closed loop mode using capacitive positioning sensors.
NPS-TG-7A high speed stage
The Queensgate NPS-TG-7A tip tilt mechanism is designed for applications requiring high speed, ultrahigh precision positioning of mirrors.
Actuators & Translators
The NPS-Z-15L offers over 15μm of closed loop travel, with sub- nanometre resolution and stability. This stage has been specifically designed for highstiffness, which allows loads of up to 500 Kg to be carried.
The MTP is an internally preloaded piezoelectric open loop translation device
The actuators offer a very stiff design that is capable of generating blocking forces as high as 1000N (MTP-15). This characteristic enables the actuator to drive demanding loads of up to a maximum 10kg (MTP-15) in the Z-axis.